Electricity

Resistance and Ohm's Law

60 questions

Easy

Electrical resistance

  1. Which symbol and unit are used for electrical resistance?
  2. What does the electrical resistance of a component tell you?
  3. How many ohms are 4.7 kΩ?
  4. What is a potentiometer used for?
  5. What is true of the resistance of an insulator?
  6. Why should connecting wires have as small a resistance as possible?
  7. Who is the unit of resistance named after?

Ohm's law

  1. What is the formula for resistance?
  2. 6 V is across a resistor and 0.5 A flows. What is the resistance?
  3. A 10 Ω resistor is connected to 5 V. What current flows?
  4. 0.1 A flows through a 100 Ω resistor. What voltage is across it?
  5. The voltage across an ohmic resistor is doubled. What happens to the current?
  6. A larger resistor is fitted at the same voltage. How does the current change?
  7. Which quantities do you measure to find a lamp's resistance using Ohm's law?

Characteristic curves

  1. What does this characteristic curve of a resistor show?
  2. According to the graph, what current flows at 4 V?

Resistance of wires

  1. How does the resistance of a wire change if it is longer but of the same material and thickness?
  2. Two copper wires are the same length, one is thicker. Which has the smaller resistance?
  3. Which wire has the smallest resistance for the same length and thickness?

Resistors in series and parallel

  1. What is the total resistance of this circuit?

Medium

Characteristic curves

  1. Which of the two resistors is larger?
  2. What is the resistance of the component with this curve?
  3. Why is the characteristic curve of a filament lamp curved?
  4. Which component has this characteristic curve?

Resistors in series and parallel

  1. Two 10 Ω resistors are connected in parallel. What is the total resistance?
  2. What is always true of the total resistance of a parallel circuit?
  3. What is the current in this circuit?
  4. Two resistors of 100 Ω and 200 Ω are in series. Across which one is the greater voltage?
  5. A second resistor is connected in parallel with one resistor; the voltage stays the same. What is true?

Resistance and temperature

  1. How does the resistance of a metal wire change when it is heated?
  2. What characterises an NTC thermistor?
  3. How does a light-dependent resistor (LDR) behave?

Resistance of wires

  1. A wire has 4 Ω. What is the resistance of an identical wire that is twice as long?
  2. A wire has 6 Ω. A wire of the same length and material has twice the cross-section. What is its resistance?
  3. All the wires are made of copper. Which has the smallest resistance?

Ohm's law

  1. An LED needs 2 V and 20 mA. It is to run on 9 V. How large must the series resistor be?
  2. Under what condition does Ohm's law apply to a metal wire?
  3. A person's body resistance is about 1000 Ω. What current would flow on touching 230 V?
  4. A 1 kΩ resistor is connected to 5 V. What current flows?

Measuring resistance

  1. What must be observed when measuring a component's resistance with a multimeter?

Hard

Resistors in series and parallel

  1. A 10 Ω resistor and a 40 Ω resistor are connected in parallel. What is the total resistance?
  2. What current flows from the battery?
  3. What is the voltage across R2?
  4. Four identical 100 Ω resistors are connected in parallel. What is the total resistance?
  5. A 10 kΩ potentiometer is connected to 9 V. The wiper is exactly in the middle and nothing is connected to it. What voltage is between the wiper and one end?
  6. A 10 kΩ potentiometer on 9 V gives 4.5 V at the wiper in the middle position when unloaded. Now a lamp is connected between the wiper and the lower end. What happens to the voltage at the wiper?
  7. A 6 Ω resistor and a 3 Ω resistor are in parallel on 6 V. Which statements are true?

Resistance of wires

  1. A copper cable is 100 m long with a cross-section of 1.5 mm². Copper has 0.017 Ω·mm²/m. Roughly what is the resistance?
  2. A wire is evenly drawn out to twice its length while its volume stays the same. How does its resistance change?
  3. Why do cables for large currents (e.g. to an electric cooker) have a larger cross-section?

Resistance and temperature

  1. Why are precision resistors often made of constantan?
  2. Filament lamps usually burn out exactly when switched on. Why?
  3. An NTC thermistor and a fixed resistor form a voltage divider. The voltage across the thermistor is measured. What happens when it gets warmer?
  4. What happens to a superconductor below its critical temperature?

Characteristic curves

  1. For a filament lamp you measure 0.2 A at 2 V and 0.3 A at 6 V. How does its resistance change?
  2. According to the graph, for which components does Ohm's law apply?

Measuring resistance

  1. The multimeter measures about 70 Ω on a switched-off 60 W filament lamp. In operation on 230 V, U / I gives about 880 Ω. What explains the difference?

Electrical resistance

  1. What is electrical conductance G?

Ohm's law

  1. Why is an electric shock more dangerous with wet hands?
  2. The heating wire of a hair dryer has 46 Ω in operation and is connected to 230 V. What current flows?

Certifications & exams

Which exam comes next?

You can already practise for 51 exams, and 16 are up for a vote. See all certifications with their official information, cast your vote or suggest your exam.

See all certifications